Welcome to our websites!

HideShow

  • WP435D Sanitary type Column High Temp. Pressure Transmitter

    WP435D Sanitary type Column High Temp. Pressure Transmitter

    WP435D Sanitary type Column High Temp. Pressure Transmitter is specially designed for food application. Its pressure-sensitive diaphragm is at the front end of the thread, the sensor is at the back of the heat sink, and high-stability edible silicone oil is used as the pressure transmission medium in the middle. This ensures the effect of low temperature during food fermentation and high temperature during tank cleaning on the transmitter. Operating temperature of this model is up to 150℃. Transmitters for gauge pressure measurement use vent cable and put molecular sieve on both ends of the cable that avoiding the performance of transmitter affected by condensation and dewfall. This series are suitable to measure and control the pressure in all kinds of easy to clog, sanitary, sterile, easy to clean environment. With the feature of high working frequency, they also are fit for dynamic measurement. 

  • WP401B PTFE Coating Diaphragm Seal Anti Corrosive Pressure Transmitter

    WP401B PTFE Coating Diaphragm Seal Anti Corrosive Pressure Transmitter

    WP401B Anti Corrosive Pressure Transmitter is a compact type of gauge pressure transmitter. Construction of its cylindrical shell is controlled to be small and lightweight, with economical cost and fully stainless steel made housing. It uses Hirschmann connector for quick and straight conduit connection. The anti-corrosion performance can be reinforced by the fitting of PTFE-coated diaphragm seal to suit highly aggressive medium.

  • WP401BS Pressure Transmitter

    WP401BS Pressure Transmitter

     Piezoresistive Sensor Technology is utilized in the measurement of WangYuan WP401BS Pressure Transmitter . The temperature compensation resistance makes on the ceramic base, which is the excellent technology of the pressure transmitters. Widely output signals are available. This series is used to measure the pressure of engine oil, brake system, fuel, diesel engine high-pressure common rail test system in the automotive industry. It can also be used to measure the pressure for liquid, gas and steam.

  • WSS Bimetallic Thermometer

    WSS Bimetallic Thermometer

    WSS Bimetallic Thermometer is also called Single Pointer Thermometer, which can be used to measure temperature of liquids, steam and gas between -80~+500℃ in process control industry.

  • WSS 500℃ Large Dial Axial Bimetallic Thermometer

    WSS 500℃ Large Dial Axial Bimetallic Thermometer

    WSS Series Bimetallic Thermometer is a mechanical type temperature gauge. The product can provide cost-effective temperature measurement up to 500℃ with fast response field pointer display. Location of stem connection has multiple structure to choose from: radial, axial and universal adjustable angle.

  • WP380 series Ultrasonic Level Meter

    WP380 series Ultrasonic Level Meter

    WP380 series Ultrasonic Level Meter is an intelligent non-contact level measuring instrument, which can be used in bulk chemical, oil and waste storage tanks. It’s ideally suitable for challenging corrosive, coating or waste liquids. This transmitter is broadly selected for atmospheric bulk storage, day tank, process vessel and waste sump application. Media examples include ink and polymer. 

  • WP401B Pressure Switch with pressure transducer function

    WP401B Pressure Switch with pressure transducer function

    WP401B pressure switch adopt advanced imported advanced sensor component, which is combined with the solid state integrated technological and isolate diaphragm technology. The pressure transmitter is designed to work well under various conditions. The temperature compensation resistance makes on the ceramic base, which is the excellent technology of the pressure transmitters. It has standard output signals 4-20mA and switch function (PNP, NPN). This pressure transducer has strong anti-jamming and suits for long distance transmission application.

  • WP201B Wind Differential Pressure Transmitter

    WP201B Wind Differential Pressure Transmitter

    The WP201B wind differential pressure transmitter adopts imported high-precision and high-stability sensor chips, adopts unique stress isolation technology, and undergoes precise temperature compensation and high-stability amplification processing to convert the differential pressure signal of the measured medium into 4-20mADC standards Signal output. High-quality sensors, sophisticated packaging technology and perfect assembly process ensure the excellent quality and best performance of the product.

  • WP435A Clamp Mounting Flat Diaphragm Hygienic Pressure Transmitter

    WP435A Clamp Mounting Flat Diaphragm Hygienic Pressure Transmitter

    WP435A Clamp Mounting Flat Diaphragm Hygienic Pressure Transmitter adopts non-cavity flat sensor diaphragm without any sanitary blind spot. It is applicable to measure and control pressure in all kinds of easy to clog, sanitary, sterile conditions. Tri-clamp installation is rather suitable for sanitary pressure sensor with range lower than 4.0MPa, which is a quick and reliable approach of process connection.  It’s important to keep the integrity of flat membrane to ensure performance, so that direct touch of diaphragm should be avoided.

  • WP421A Medium & High Temperature Pressure Transmitter

    WP421A Medium & High Temperature Pressure Transmitter

    The WP421medium and high temperature pressure transmitter is assembled with imported high temperature resistant sensitive components, and the sensor probe can work stably for a long time at a high temperature of 350. The laser cold welding process is used between the core and the stainless steel shell to completely melt it into one body, ensuring the safety of the transmitter under high temperature conditions. The pressure core of the sensor and the amplifier circuit are insulated with PTFE gaskets, and a heat sink is added. The internal lead holes are filled with high-efficiency thermal insulation material aluminum silicate, which effectively prevents heat conduction and ensures the amplification and conversion circuit part work at allowable temperature.

  • WP402B Industrial Class High Accuracy Pressure transmitter

    WP402B Industrial Class High Accuracy Pressure transmitter

    High-quality WP402B pressure transmitter selects imported, high-precision sensitive components with anti-corrosion film. The component combines solid-state integration technology with isolation diaphragm technology, and the product design allows it to work under harsh environmental conditions and still maintain excellent working performance. The resistance of this product for temperature compensation is made on the mixed ceramic substrate, and the sensitive components provide a small temperature error of 0.25% FS (maximum) within the compensation temperature range (-20~85℃). This pressure transmitter has strong anti-jamming and suits for long distance transmission application.