Flow Meters
-
WPLD Series Electromagnetic Flow meter for water & waste water treatment
WPLD series electromagnetic flow meters are designed to measure the volumetric flow rate of almost any electrically conductive liquids, as well as sludges, pastes and slurries in duct. A prerequisite is that the medium must have a certain minimum conductivity. The temperature, pressure, viscosity and density have little influence on the result. Our various magnetic flow transmitters offer reliable operation as well as easy installation and maintenance.
WPLD series magnetic flow meter has wide range of flow solution with high quality, accurate and reliable products. Our Flow Technologies can provide a solution for virtually all flow applications. The transmitter is robust, cost-effective and suitable for all-round applications and has a measuring accuracy of ± 0.5% of the flow rate.
-
WPLU Series Liquid Steam Vortex Flow Meters
WPLU series Vortex flow meters are suitable for a wide range of media. It measures both conducting and non-conducting liquids as well as all industrial gases. It also measures saturated steam and superheated steam, compressed air and nitrogen, liquefied gas and flue gas, demineralized water and boiler feed water, solvents and heat transfer oil. WPLU series Vortex flowmeters have the advantage of high signal-to-noise ratio, high sensitivity, long-term stability.
-
WPZ Metal Tube Float Flow Meter / Rotameter
Metal Tube Float Flow Meter, also Known as the “Metal Tube Rotameter”, is a instrument of measurement commonly used in the industrial automation process management to measure the variable area flow. It is designed for measuring the flows of liquid, gas and steam, especially applicable for small flow rate and low flow speed measurement. WanyYuan WPZ series Metal Tube Float Flowmeters are principally composed of two major parts: sensor and indicator. The sensor part mainly consists of the joint flange, cone, float as well as upper and lower guiders while the indicator includes casing, transmission system, dial scale and electric transmission system.
WPZ Series Metal-Tube Float Flow Meter has been awarded first prize of national major technique & equipment innovation, and excellence prize of the Ministry of Chemical Industry. It was entitled to take the task of the H27 Metal-Tube Float Flowmeter in abroad market due to its simple structure, reliability, wide temperature range, high precision, and low price.
This WPZ Series Flow Meter can be designed to alternative type of local indication, electric transform, anticorrosion and explosion-proof for different purpose of gas or liquid-measuring.
For the measurement of some corrosive liquid, like chlorine, saline water, hydrochloric acid, hydrogen nitrate, sulfuric acid, this kind of flowmeter allows designer to build the connecting part with different materials, like stainless steel-1Cr18NiTi, molybdenum 2 titanium-OCr18Ni12Mo2Ti.1Cr18Ni12Mo2Ti, or add additional fluorine plastic lining. Other special materials are also available at the customer’s order.
WPZ Series Electric Flow Meter’s standard electric output signal make it available to connect with electric element modular which make a access to computer process and integrated control.
-
WPLV Series V-Cone Flow Meters
WPLV series V-cone flowmeter is an innovative flowmeter with high-precise flow measure and specially design to various kinds of difficult occasion carry out high-precisely survey to fluid. The product is throttled down a V-cone that is hanged on the center of manifold. This will force the fluid is centered as the centerline of manifold, and washed around the cone.
Compare with traditional throttling component, this kind of geometric figure has many advantages. Our product doesn’t bring visible influence to its accuracy of measurement because of its special design, and enable it to apply to difficult measuring occasion such as no straight length, flow disorder, and biphase compound bodies and so on.
This series of V-cone flow meter can work with differential pressure transmitter WP3051DP and flow totalizer WP-L to achieve flow measurement and control.
-
WPLL Series Intelligent Liquid Turbine Flow Meters
WPLL Series intelligent liquid turbine flow meter is widely used to measure liquids instant flow rate and cumulative total, so it can control and quantify liquid volume. The turbine flow meter consists of a multiple-bladed rotor mounted with a pipe, perpendicular to the liquid flow. The rotor spins as the liquid passes through the blades. The rotational speed is a direct function of flow rate and can be sensed by magnetic pick-up, photoelectric cell, or gears. Electrical pulses can be counted and totalized.
Flow meter coefficients given by calibration certificate suits to these liquids, which viscosity is less than 5х10-6m2/s. If liquid’s viscosity > 5х10-6m2/s, please re-calibrate sensor according to actual liquid and update instrument’s coefficients before starting work.
-
WPLG Series Throttling Orifice Flow Meters
WPLG series throttling Orifice Plate Flow Meter is one of the common types of flow meter, which can be used for measuring the flow of liquids/ gases and vapour during industrial production process. We provide throttle flow meters with corner pressure tappings, flange pressure tappings, and D-D/2 span pressure tappings, ISA 1932 nozzle, long neck nozzle and other special throttle devices (1/4 round nozzle, segmental orifice plate and so on).
This series of throttle Orifice Plate flow meter can work with differential pressure transmitter WP3051DP and flow totalizer WP-L to achieve flow measurement and control.
