WP311B Immersion type 4-20mA water level transmitter can be used to measure & control liquid level in:
★ Level measuring
★ Building automation
★ Ocean and marine
★ Constant pressure water supply
★ Metallurgy, environment protection
★ Medical treatment and etc.
WP311B Immersion type 4-20mA water level transmitter(also called hydrostatic pressure transmitter, Submersible pressure transmitters) use advanced imported anti-corrosion diaphragm sensitive components, the sensor ...
WPH-1 compression Load cell suits for measuring small range and a variety of load force too
WPH-1 compression Load cell adopts combined type S beam, there is overload protection device inside. With the advantage of natural linear and stability, this load cell suit for measuring small range and a variety of load force too. It’s a excellent conversion instrument of electronic belt scales.
Name
Compression load cell
Capacity ranges
0-1,2,5,8,10,20,30,50,100,150,200,300kg
Output
4-20mA ,0-...
WPH-3 series beam Compression load cells are used in multiples in floor scales, belt weighers, weighing systems, pallet scales, check scales, conveyor scales.
Most beam Compression load cells are fully approved acc. to OIML, NTEP, FM and ATEX as standard. Thus they can be globally used in legal weighing systems. They are mostly made from stainless steel to cope with harsh industrial environment.
Name
Beam Compression load cell
Capacity ranges
0-5,10,20,30,50,100,200,300kg;
0.5,0.8,1,1.5...
This series pressure transmitter can be widely used in
Petroleum industry
Water flow measurement
Steam measurement
Oil & Gas products and transportation
The Wangyuan WP3051T In-line pressure transmitters design is offered for Gage Pressure (GP) and Absolute Pressure (AP) measurements. Piezoresistive sensor technology is utilized in the wangyuan WP3051T measurements.
The major components of WP3051 are the sensor module and the electronics housing. The sensor module contains the oil filled ...
This series Differential Pressure Transmitters can be used in :
Pharmaceutical
Power, light industry
Water & Wastewater
Petroleum, Chemicals
Oil & Gas, Pulp & Paper
Mechanical and Metallurgy
Environmental protection fields and etc.
WP3351 DP Remote Differential Pressure Transmitters with flange mounted can avoid measured medium direct contact with transmitter diaphragm. It is especially suitable for application environment like this:
1. Measured medium will corrode wetted parts ...
WPL-2 tension Load cell can be used to measure pull weight and force, and pressure load too.
This Tension S type load cell has advantages of adopting shear stress measurement, simple structure, easy to install, High stability & reliability. It is applied as primary instruments of hopper scales, crane scales and etc.
Name
Tension S type load cell
Capacity ranges
0-2~200kN (0-0.2~20t)
Output
4-20mA ,0-10mA , 0-5V , Optional
Maximum Capacity
150% FS
Nonlinearity
±0.05%FS
Re...
WPL-2 tension Load cell can be used to measure pull weight and force, and pressure load too.
This Tension S type load cell has advantages of adopting shear stress measurement, simple structure, easy to install, High stability & reliability. It is applied as primary instruments of hopper scales, crane scales and etc.
Name
Tension S type load cell
Capacity ranges
0-2~200kN (0-0.2~20t)
Output
4-20mA ,0-10mA , 0-5V , Optional
Maximum Capacity
150% FS
Nonlinearity
±0.05%FS
Re...
WPH-1 compression Load cell suits for measuring small range and a variety of load force too
WPH-1 compression Load cell adopts combined type S beam, there is overload protection device inside. With the advantage of natural linear and stability, this load cell suit for measuring small range and a variety of load force too. It’s a excellent conversion instrument of electronic belt scales.
Name
Compression load cell
Capacity ranges
0-1,2,5,8,10,20,30,50,100,150,200,300kg
Output
4-20mA ,0-...
WPH-3 series beam Compression load cells are used in multiples in floor scales, belt weighers, weighing systems, pallet scales, check scales, conveyor scales.
Most beam Compression load cells are fully approved acc. to OIML, NTEP, FM and ATEX as standard. Thus they can be globally used in legal weighing systems. They are mostly made from stainless steel to cope with harsh industrial environment.
Name
Beam Compression load cell
Capacity ranges
0-5,10,20,30,50,100,200,300kg;
0.5,0.8,1,1.5...
WPH-1 compression Load cell suits for measuring small range and a variety of load force too
WPH-1 compression Load cell adopts combined type S beam, there is overload protection device inside. With the advantage of natural linear and stability, this load cell suit for measuring small range and a variety of load force too. It’s a excellent conversion instrument of electronic belt scales.
Name
Compression load cell
Capacity ranges
0-1,2,5,8,10,20,30,50,100,150,200,300kg
Output
4-20mA ,0-...
This intelligent liquid turbine flow meter can be widely used to measure liquids flow rate in Factory, Petroleum, Chemical industry, Metallurgy, Paper, and other industries.
WPLL Series intelligent liquid turbine flow meter is widely used to measure liquids instant flow rate and cumulative total, so it can control and quantify liquid volume. The turbine flow meter consists of a multiple-bladed rotor mounted with a pipe, perpendicular to the liquid flow. The rotor spins as the liquid passes th...
WPH-1 compression Load cell suits for measuring small range and a variety of load force too
WPH-1 compression Load cell adopts combined type S beam, there is overload protection device inside. With the advantage of natural linear and stability, this load cell suit for measuring small range and a variety of load force too. It’s a excellent conversion instrument of electronic belt scales.
Name
Compression load cell
Capacity ranges
0-1,2,5,8,10,20,30,50,100,150,200,300kg
Output
4-20mA ,0-...